300Mbps Wireless-N 802.11 Wifi Repeater AP Router Signal Booster Range Extender



The WiFi Repeater, also called range extender is used to broaden
range of a wifi network. A wifi repeater works by receiving the Wifi
signal from a router and then amplify and rebroadcast it around locally.
With a wifi repeater Computers and printers that located out of the
original range of access point can access the extended wifi network.
Wifi repeater effectively doubles the coverage area of your existing
Wifi network, extend your network to the far end of your home or office,
you just need to place it half way between the computers and router.


Improves wireless coverage in all WLAN networks
WLAN 802.11n for wireless high-speed access
Downward compatible with 802.11g(54Mbit/s) and 802.11b standard(11Mbit/s)
Support 2.4GHz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP(128/64)
Software wizard for simple setup
Antennas integrated


Ports:1 x RJ45 ,
Button:Reset WPS
LED:1x LAN, 1 x WLAN, 1 x Power,1 x WPS,
Power Supply:Internal DC5V / 1A
Power Plug:UK/EU/US (option)
Power Consumption:2.3W
Rated Voltage/ requency /current:100-240 Va.c. 50/60Hz, 0.1A Max ,


110 ~ 230-volt socket
The WLAN client must support at least the WPA encryption standard.
WLAN access point and the WLAN client with automatic IP address assignment (DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to “visible”.
WLAN access point/client according to IEEE 802.11n, g, b.

Package Content

1 x Wireless-N Repeater(US Plug)
1 x RJ-45 Networking Cable
1 x Quick Installation

Note:Repeater setting mistake how to do?
If a mistake, press the reset Kin reset after restore factory settings.
Tips: Reset the need to plug the power
Note Reset: Be sure to go out in the third signal, the second signal to stabilize, then press the reset button, reset.
no circumstances connected, press the reset button for 10 seconds, then
release, the radio signal will go out after 2 to 3 seconds, the third
indicator lights up, then turns off the second long bright lights. Reset

On Jun-26-17 at 00:42:34 PDT, seller added the following information:



Wifi Repeater

Frequency Bands



Does not apply

Network Connectivity

Wired-Ethernet (RJ-45), Wireless-Wi-Fi 802.11a, Wireless-Wi-Fi 802.11b, Wireless-Wi-Fi 802.11g, Wireless-Wi-Fi 802.11n

Country/Region of Manufacture





Does Not Apply